| Grip |
 |
| |
Super Javelin MK II
The Super Javelin MKII is an ultra modern Crane system with a partially "open" design
structure that is being extended with a modern tubing section. The Parallel Bars
are integrated inside the arm of the Javelin which causes less shadows and makes
it easier to get into difficult to reach spots on sets. Super Javelin MKII offers
a very stable Remote Crane at Heights up to 40 ft/12,2 Mtrs. The modular systems
offers you 8 different sizes and can be configurated to handle weight ranging
from 220 Lbs/100 Kgs at 25 ft/7.8 Mtrs to 88 Lbs/40 Kgs at 40 ft/12,2 Mtr. Existing
Javelin Cranes can also be easily upgraded to the Super Javelin MKII.The Javelin
is mounted on a wide base dolly. The dolly has four wheel steering and can be
operated from the front or the back. |
 |
| |
Scanner
The Scanner is not only a crane arm. It consists of a complete remote controlled
camera system, including the Scanner Arm, the Scanner Remote controlled camera
head and the Scanner Dolly. The arm is a super lightweight telescopic arm with
adjustable lengths ranging from 375 cm (12.5 ft) to 525 cm (17.5 ft.) The parallel
bars are positioned on the sides of the arm which improves the sleek shape
of the crane. At the end of the arm you will find the Scanner Head on which
you can attach most video cameras and a medium sized ENG type of lens.The camera
functions such as start/stop/power/zoom and focus will be sent through the
integrated sliprings in the head, to the back of the Scanner Arm, where you
can operate both the crane and the camera with a single operator. By using
the optionally supplied table support, you can split the camera and crane operation
so that you use separate operators for the crane and remote head/camera functions.
The Scanner Arm and Scanner Head are mounted on the extremely stable Scanner
Dolly. |
 |
| |
Scanner Elite Head
The Scanner ELITE Head has all of the features which have become the Trademark
of Egripment Remote Heads. It is strong, Responsive, Easy to use, and has an
incredible Smoothness of Movement. These features include functions such as
Speed adjustments for Pan, Tilt and Zoom, Reverse switches for Pan, Tilt, Zoom
and Focus, adjustable Electronic Dampening System (EDS) to ensure a smooth
start and stop, choice of Triax, Tally sensor, Lens selector switch, Power
supply via ECU and Multi cable system for Intercom, return video, tally rocker
(3rd axe) or camera power. We offer you a choice to operate the Scanner ELITE
head from the back of the Elite Arm or from a separate Table support. Between
the controls for Pan, Tilt, Zoom and Focus you will find the Electronic Control
Unit of the head, from which the operator can easily control and adjust all
of the functions of the ELITE head. |
 |
| |
HotHead
The HotHead is Egripment's top of the range remotely controlled pan and tilt
head. This head gives the camera operator complete remote control of all functions
of TV or Film cameras, whilst allowing him to pan and tilt through a full 360
degrees at speeds ranging between 2,5 seconds and 17 minutes. This total control
offers directors, producers and cinematographers unique flexibility that satisfies
the most demanding audiences. The HotHead allows your creativity to become
reality. 34 channel gold sliprings guarantee broadcast quality transmission
of all camera functions such as Triax, BNC, Camera power, zoom, tally, focus,
iris, video assist etc. Egripment remote heads are all part of a modular system
that can be controlled via the same control consoles and cabling system.
|
 |
|
|
|
|
